Making a Splash

Apparently bathtubs were the hot home-decor item at Michael's this spring. Of course, the doll collector can't help but wonder if any of the tubs will work with her dolls. I ended up buying three. 

The white tub with the black feet is just about right for 16" dolls. Sam's legs can't extend all the way out inside the tub, but she found it a nice place to soak and day dream.

There were two other sizes of this tub at Michael's. At least, I think that one next to the biggest tub, is smaller than the medium tub. I forget now, and it's hard to tell!

Teresa liked playing with a rubber ducky. This tub is just a bit on the big size for a 12" doll, maybe, but I think it looks fine when pictured from the side.

There were three colors of that bathtub at Michael's: the one above and the two below.

Marie thinks this bathtub just the right size for her and her school friends. The Eden line of Madeline dolls included a set of bathroom furniture long ago, but as with just about everything from this line, it's super expensive on the secondary market now. The soap/dish and bath brush came from a Madeline set, and I also have a Madeline freestanding towel rack which came with the towel that Marie is using.

I happened to go down a different aisle at Michael's and saw that there were also bathtubs like this one in red and green, in the "strawberry theme" section of home decor.

I tried the trick of putting clear Contact paper on the floor tiles, which is supposed to make the paper look more like shiny vinyl tile. Maybe it's just my lighting, or angles, or something, but I don't see a big difference.

Also at Micheal's was a bathtub/candle holder, in two different colors.

Someone else on Instagram bought it for dolls. I was debating getting one, but I didn't want to bother digging out the candle. These tubs were pretty small, too.

Also, there was this galvanized tub with a shower head. This would be about right for American Girl or a large doll like that.

Don't mind the prices on Michael's things. The newest stuff goes on sale practically from the minute it comes in the door. This conveniently means you can't use their coupons for the newest stuff, as most Michael's coupons are not usable with sales items. Occasionally you do get a coupon which gives you a percentage off of your entire purchase including sales. On the other hand, last month I walked out with a plastic scrapbook paper storage case, two rolls of materials for my Cricut, and a several foot long garland made up of foam-type pastel Easter eggs for less than $8. I felt like I was stealing something. The trick at Michael's is to keep your eye on sales and to be signed up in their membership program, which gets you coupons.

Also at Michael's of doll interest was this piece of artificial green grass. It was labeled as a placemat, but can you imagine crumbs and spills on this? Maybe it would be nice for a centerpiece, with an Easter tree on top. It's smaller than the other piece of fake grass that I have; I used this one for my Easter shoot.

Then there were these chairs. I thought really hard about getting the red one, but decided against it. Someone on Instagram showed one of those chairs with a Tonner doll, and it looked okay, but didn't make me regret not buying one. I feel like the yellow and white chairs had too deep of a seat. They're probably made to display something-not-a-doll on, so that makes sense.

That reminds me that Michael's did have a small group of little plants of the kind that rarely need water, like a bromeliad. They might make good plants for a doll house or display. If Michael's doesn't have any more, because it took me forever to get this post up, or if you don't have a Michael's, I'm sure they can be found other places. At least in the US, these plants are another one of the things currently in style for home-decor.

Michael's happened to have these trash and recycle cans. I've seen those for a long time in other people's pictures. I think they're supposed to be for use on an office desk.

 

Lastly were these wall-hanging shelves. Or at least, they're supposed to be shelves. I thought they would make good side tables for dolls. Jaye of Jaye's Doll Space put up a picture on Instagram where she used the shorter one as a raised cocktail table. It's fun to see other people find the same things to re-purpose for dolls that you did. The small and large are two different size options, not the same piece.

I happened to be at Hobby Lobby around the same time, but the only thing doll-adaptable that I saw, besides the dollhouse things that they sell, were these mugs and teapots. And of course the mugs and teapots aren't the same scale, unless maybe the teapot is a one cuppa size. Both items were also too big for 12" dolls, but could work with a larger crew.

How often do you find regular decor that you can use for dolls?

3D Printing Doll Things

I was debating what I wanted to post next on, now that I'm back to everyday blogging, when Mr. BTEG presented me with a couple of doll items that he made for me with his 3D printer. That made me happy, and my choice of post easy. But I'm going to start at the beginning of my experience with 3D printing for dolls, for those of you who haven't been reading me for years, or don't recall previous posts.

In January of 2016, I tagged along with Mr. BTEG at a technical conference he was attending. The conference happened to conveniently be held at a large indoor waterpark, which especially in a NE Ohio winter, is very appealing. Mr. BTEG had already started exploring his interest in 3D printing, and he pointed me to a website called Thingiverse, where I discovered that the late lamented Makies Lab had put up several free downloads for prints, including a tea set. The conference offered free 3D prints, so Mr. BTEG had them make the tea set for me. As you'll see, the set is very primitive compared to some of the other things that I'm going to show you, but just being able to have something printed for your doll like that *snaps* was still very exciting. Here's Meg, my only Makie, holding the tea pot from that set.

Then Mr. BTEG invested in a lower-end 3D printer of his own in January 2018! I had no idea how hard it was to set up a 3D printer to make a suitable print. It can take hours to make sure the printer lays down filament correctly, so that the filament doesn't get shifted, and throw the whole print out of whack. Here's a couple of examples of common prints made to test your 3D printer.

The above are blocks printed out to test the X, Y and Z axis of a print. The background is one of my Barbie diorama walls, so you can see that the blocks are fairly small. I hope you can also see the "shadow" of the Y on the middle block, which meant the Y axis needed some work on that particular print.

The piece above is called a "benchy," and is also apparently known as "The jolly 3D printing torture-test." Obviously, you don't print this out until you're a bit more confident in how your printer is configured. You can visit 3DBenchy.com to check out all the creative things people do with benchy prints. It's also the source for my quote above.

Come see what else he made below the fold!

Rebodying Belle, and Ever After High Book Party Ginger Breadhouse

I've started getting into the trend of rebodying dolls with the new Barbie Made to Move bodies. However, the first doll I picked to rebody was an older doll, a Mattel Belle doll from... quite a while back. I have many dolls that would be fun to have out again, if they were a little more posable, including this one. I did have to wash Belle's hair, to clean out the rubber band that had dried out and stuck to her hair. I haven't managed to make her hair behave enough to avoid using a rubber band completely.

First, here's Belle dressed as a modern young woman. I quickly discovered that this top sheds sparkles.

She has the ability to actually carry books now. :)

And here she is in her original clothes. The dress is too big in the bust now, but it works. Now she has the ability to offer tea to a visitor to the castle.

And she can reenact scenes from the movie.

Below the fold, I'm going to put pictures of another older doll of mine who could really use a rebody, and my new Ever After High doll.